25 MW 2020 Used Siemens SGT-700 DLE

USP&E is selling: 25 MW 2020 Used Siemens SGT-700 DLE Natural Gas Turbine Generator Set
50 Hz; 11,000 Volts

Units available: 1
***Note that price is per unit

USP&E Global offers an exclusive listing for a used Siemens SGT-700 natural gas turbine, a 2020-vintage unit rated at 25 MW and available now from USP&E's proprietary inventory of over 3,000 MW. This used Siemens SGT-700 natural gas turbine operates on natural gas with the Dry Low Emissions (DLE) combustion system, runs at 50 Hz, and is rated at 11,000 volts, with just 2,000 logged operating hours, making it one of the lowest-hour, near-new examples of this model currently on the market. Located in Europe and available for rapid mobilisation, this asset is configured as a complete gas turbine generator package with a Heat Recovery Steam Generator (HRSG), a configuration purpose-built for combined-cycle and combined heat and power (CHP) deployment. This is an exclusive USP&E asset listed under stock number USP041509, and a used Siemens SGT-700 natural gas turbine of this specification, vintage, and condition cannot be found through any other channel. Buyers seeking a high-efficiency, low-hours gas turbine for immediate project deployment will not find this unit listed elsewhere.

The Siemens SGT-700 is a proven industrial gas turbine in the 25 MW class, widely recognised for its operational flexibility, high thermal efficiency, and reliability across a broad range of duty cycles. The DLE combustion system significantly reduces NOx emissions without the requirement for water or steam injection, making this used Siemens SGT-700 natural gas turbine well suited to projects operating in environmentally regulated markets and regions where low-emission generation is a permitting requirement. At 50 Hz and 11,000 volts, the unit aligns directly with European, Middle Eastern, African, and Asian grid standards, and at only 2,000 hours it retains a substantial operational life before any major planned maintenance interval. The inclusion of a Heat Recovery Steam Generator in the package transforms this asset into a complete used gas turbine generator with HRSG, enabling operators to capture exhaust heat for steam generation, district heating, or process heat supply. This makes the unit exceptionally well positioned for CHP applications where fuel efficiency is measured across both electrical output and heat recovery, and for combined-cycle configurations where the addition of a steam turbine can increase overall plant efficiency well beyond what simple-cycle operation achieves. The SGT-700's mechanical drive capability also extends its suitability to gas compression, pipeline applications, and upstream oil and gas facilities where shaft power rather than grid export is the primary requirement.

USP&E Global is a turnkey power plant EPC contractor with over 150 completed power station projects across 45 countries, and the company is uniquely positioned to supply this used Siemens SGT-700 natural gas turbine as part of a fully integrated project scope. USP&E's engineering, procurement, and construction capabilities cover everything from site assessment, civil works, and fuel infrastructure through to electrical interconnection, control systems integration, and commissioning. For operators in petrochemical and industrial environments, including propane dehydrogenation (PDH) facilities and other process-intensive plants where reliable on-site power generation and process heat are operationally critical, USP&E can deliver this asset as a fully installed and commissioned power solution rather than simply a piece of equipment. The company's operations and maintenance division provides ongoing O&M and long-term service agreements (LTSA) that keep assets performing at nameplate output throughout their service life, a capability that is especially valued in power station O&M frontier markets where OEM support infrastructure is limited and plant uptime is non-negotiable. USP&E's ISO 9001:2015 and ISO 45001:2018 certifications, combined with full OFAC and FCPA compliance, mean that every project engagement meets the highest international standards for quality, health, safety, and legal integrity. For developers, utilities, IPPs, industrial operators, and government energy agencies evaluating gas turbine for industrial and petrochemical processes or for gas turbine for CHP applications, USP&E offers not just the asset but the full project pathway from acquisition through to commercial operation.

This used Siemens SGT-700 natural gas turbine represents a rare opportunity to acquire a near-new, low-hours 25 MW industrial gas turbine with a complete HRSG package from a single trusted source. With only 2,000 operating hours, a 2020 build year, and a configuration ready for simple-cycle, combined-cycle, or CHP deployment, this asset is suited to a wide range of project types and is available for rapid delivery from its current European location. USP&E Global holds exclusivity on this listing, and no other supplier can offer this unit. Click Fast Quote or contact USP&E Global directly to receive pricing, technical documentation, and a full project delivery proposal for stock number USP041509.

---